| Products |
|
Click Here for Case Studies
|
|
Floor Primer
This product is a ready mixed latex primer used to improve adhesion between wood subfloors and concrete, prior to the installation of LEVELROCK™ underlayments.
|
|
|
LEVELROCK® SE-100™ Surface Enhancer
This product is a specially formulated top coat that chemically enhances the bond between underlayment and floor coverings. Built in identifier that "glows" under a black light confirming application
|
|
LEVELROCK® Topseal
LEVELROCK® TOPSEAL™ - a specially formulated sealer for use with LEVELROCK® Brand floor underlayments. Can be used as a sealer for LEVELROCK® underlayment to enhance the bond between the underlayment and floor covering adhesives. Is also recommended for use as a sealer for porous concrete surfaces prior to the application of LEVELROCK® Brand floor underlayment. Seals porous concrete surfaces that might adversely affect flow characteristics of LEVELROCK® underlayment.
|
|
Gypsum cement-based:
|
|
Floor Underlayment 2500
Poured as a fire and sound barrier on wood frame structures, this product is the most economical, highest compressive strength (up to 3200 psi) underlayment product available for multi-family construction. |
|
|
Floor Underlayment 3500
Ideal for residential and commercial applications with compressive strengths from 3500-4500 psi. In residential projects, this product can be used as an upgrade in hard surface areas or as a topping to correct uneven floors in commercial applications. For higher traffic areas, it meets vinyl floor covering industry standards for non-Portland Cement underlayments.
|
|
Floor Underlayment 4500
One of the highest compressive strength (up to 5500 psi) gypsum floor underlayments on the market today. This product is ideal for floor corrections over concrete substrates. It can be applied at variable thickness up to 3 inches, making it ideal for heavy-traffic commercial, institutional, and renovation projects.
|
|
|
Floor Underlayment RH2500,3500
Levelrock brand floor underlayment RH (Radiant Heat) is specifically formulated for electrical and hot water radiant heat floor installations. The non-shrinking nature of LEVELROCK brand floor underlayment RH (Radiant Heat) locks tubing in place, preventing noise and tubing chafing, and its special formulation prevents the high temperature associated with radiant heat floors from breaking down the floor matrix
|
|
Floor Underlayment PROFLOW
LEVELROCK® Brand Floor Underlayment PROFLOW™ is the industry's premium gypsum cement designed by USG for use as a underlayment in commercial, institutional, and rehab construction. It provides a smooth, hard underlayment surface over concrete slabs, pre-stressed concrete or concrete planks at thicknesses from featheredge to 1 inch thickness |
|
|
Portland cement-based:
|
|
Floor Underlayment SLC200 New!
LEVELROCK™ Floor Underlayment™ SLC200(self leveling cement is an economical Portland based cement specifically designed for leveling and topping, un-even, rough or damaged concrete where additional thickness is required
|
|
|
Floor Underlayment SLC300
New!
LEVELROCK™ Floor Underlayment™ SLC300(self leveling cement is a self-drying engineered cement specifically designed for leveling and topping, un-even, rough or damaged concrete when downtime is critical
|
|
Floor Underlayment SLC400 New!
Underlayment™ SLC400(self leveling cement is a self-drying engineered cement specifically designed as a wear surface for leveling and topping un-even, rough or damaged concrete in warehouses or industrial applications.
|
|
|
|
|
LEVELROCK® Brand SRM-25
Levelrock® Brand SRM-25™ is a ¼" Sound Reduction Mat used to meet the NEW minimum ICC code criteria of a 50 IIC and 50 STC. SRM-25™ can exceed 60 IIC and 60 STC points based on tested assemblies. Accessories available include SRM Levelrock™ Brand Seam Tape and Levelrock® Brand Perimeter Isolations strip
|
|
|
Sound Reduction Board (SRB)
Levelrock® Brand SRB is a 3/8" Sound Reduction Board that is an economical sound control material used to increase IIC and STC sound ratings.
|